Biol425 2015

From QiuLab
Revision as of 14:06, 6 May 2015 by imported>Weigang (→‎May 6: Population Analysis (2))
Jump to navigation Jump to search
Computational Molecular Biology (BIOL 425/790.49, Spring 2015)
Instructor: Dr Weigang Qiu, Associate Professor of Biology; weigang at genectr.hunter.cuny.edu
Room:1000G HN (10th Floor, North Building, Computer Science Department, Linux Lab FAQ)
Class Hours: Wednesdays 10:10 am-12:40 pm
Office Hours & Address: Wednesdays 5-7pm or by appointment; Address: Belfer Research Building, 413 East 69th Street (between York and 1st Avenue), New York, NY 10021. Direction via Google Map;

Course Schedule (All Wednesdays)

January 28. Course overview & Unix tools

  • Course Overview. Lecture slides:
    File:Session-1-small-2015.pdf
  • Learning Goals: (1) Understand the "Omics" files; (2) Review/Learn Unix tools
  • In-Class Tutorial: Unix file filters
  1. Without changing directory, long-list genome, transcriptome, and proteome files using ls
  2. Without changing directory, view genome, transcriptome, and proteome files using less -S
  3. Using grep, find out the size of Borrelia burgdorferi B31 genome in terms of the number of replicons ("GBB.1con" file)
  4. Using sort, sort the replicons by (a) contig id (3rd field, numerically); and (b) replicon type (4th field)
  5. Using cut, show only the (a) contig id (3rd field); (b) replicon type (4th field)
  6. Using tr, (a) replace "_" with "|"; (b) remove ">"
  7. Using sed, (a) replace "Borrelia" with abbreviation "B."; (b) remove "plasmid" from all lines
  8. Using paste -s, extract all contig ids and concatenate them with ";"
  9. Using a combination of cut and uniq, count how many circular plasmids ("cp") and how many linear plasmids ("lp")
  • In-Class Challenges
  1. Using the "GBB.seq" file, find out the number of genes on each plasmid
grep ">" ../../bio425/data/GBB.seq | cut -c1-4| sort | uniq -c
  1. Using the "ge.dat" file, find out (a) the number of genes; (b) the number of cell lines; (c) the expression values of three genes: ERBB2, ESR1, and PGR
grep -v "Description" ../../bio425/data/ge.dat | wc -l; or:  grep -vc "Description" ../../bio425/data/ge.dat
grep "Description" ../../bio425/data/ge.dat | tr '\t' '\n'| grep -v "Desc" | wc -l
grep -Pw "ERBB2|PGR|ESR1" ../../bio425/data/ge.dat
Assignment #1
Unix Text Filters (10 pts) Show both commands and outputs for the following questions:
  1. Without changing directory (i.e., remain in your home directory), locate and long-list the genbank file named "GBB.gb" in the course data directory
  2. Count the total number of lines, show the first and last 10 lines of the file. Using a combination of head and tail commands, show only the lines containing the translated protein sequence of the first gene
  3. Count the total number of replicans by extracting lines containing "LOCUS" (case sensitive); sort them by the total number of bases ("bp")
  4. Remove the string "(plasmid" from the above output
  5. Extract the second column (replicon names) from the above output. [Hint: these fields are delimited by an unequal number of spaces, not by tabs. Use tr -s to first squeeze to single space]

February 4. Genomics (1): Gene-Finding

  • Learning goals: (1) Running UNIX programs; (2) Parse text with Perl anonymous hash
  • Lecture slides:
    File:Session-2-2015.pdf
  • In-Class Tutorials
  1. Identify ORFs in a prokaryote genome
    1. Go to NCBI ORF Finder page
    2. Paste in the GenBank Accession: AE000791.1 and click "orfFind"
    3. Change minimum length for ORFs to "300" and click "Redraw". How many genes are predicted? What is the reading frame for each ORF? Coordinates? Coding direction?
    4. Click "Six Frames" to show positions of stop codons (magenta) and start codons (cyan)
  2. Gene finder using GLIMMER
    1. Locate the GLIMMER executables: ls /data/biocs/b/bio425/bin/
    2. Locate Borrelia genome files: ls /data/biocs/b/bio425/data/GBB.1con-splitted/
    3. Predict ORFs: ../../bio425/bin/long-orfs ../../bio425/data/GBB.1con-splitted/Borrelia_burgdorferi_4041_cp9_plasmid_C.fas cp9.coord [Note the two arguments: one input file and the other output filename]
    4. Open output file with cat cp9.coord. Compare results with those from NCBI ORF Finder.
    5. Extract lines with coordinates" grep "^[0-9]" cp9.coord > cp9.coord2
    6. Extract sequences into a FASTA file: ../../bio425/bin/extract ../../bio425/data/GBB.1con-splitted/Borrelia_burgdorferi_4041_cp9_plasmid_C.fas cp9.coord2 > cp9.fas [Note two input files and standard output, which is then redirected (i.e., saved) into a new file]
  3. bioseq
    1. Add bp-utils into $PATH by editing the .bash_profile file and run source .bash_profile
    2. Run bioseq with these options: -l, -n, -c, -r, -t1, -t, -t6, and -s
    3. In-Class Challenge: use bioseq to extract and translate the 1st (+1 frame) and 5th (-1 frame) genes.
cp ../../bio425/data/GBB.1con-splitted/Borrelia_burgdorferi_4041_cp9_plasmid_C.fas cp9.plasmid.fas # copy plasmid sequence
bioseq -s'163,1272' cp9.plasmid.fas | bioseq -t1 # extract first predicted ORF (+1 frame)
bioseq -s'3853,4377' cp9.plasmid.fas | bioseq -r | bioseq -t1 # extract 5th ORF (since it is -1 frame, need to rev-com before translation
Assignment #2 (Finalized as of Saturday 2/7/205, at 1pm)
UNIX Exercises (10 pts)
  1. Using ssh, log into eniac.cs.hunter.cuny.edu & then ssh into another host (e.g. "cslab8") for the exercises
  2. Copy data file ../../bio425/data/mystery_seq1.fas into your home directry
  3. Add /data/biocs/b/bio425/bin to your the $PATH variable in the ".bash_profile" file (using vi or emacs).
  4. Run source ~/.bash_profile to activate the above path
  5. Use the long-orf command to predict ORFs on the mystery_seq1. Save resulting coord file as "mystery_seq1.coord".
  6. Extract ONLY the lines containing ORF information into a new file "mystery_seq1.coord2" using grep
  7. Run extract to extract FASTA sequences of all predicted ORFs. Save as "mys.nuc".
  8. Translate "mys.nuc" with bioseq -t1. Save to "mys.pep" (don't be surprised if the 2nd sequence contains internal stop codons)
  9. Use bioseq to extract the ORF sequences, save as "mys.nuc2"
  10. Translate "mys.nuc2" with bioseq -t1. Save to "mys.pep2". This file should NOT contain any internal stop codons.

Note: Show all commands and outputs.To log off, type "exit" twice (first log out of the "cslab" host, 2nd time log off the "eniac" host).

February 11. Genomics (2): BASH & BLAST

  1. Build workflow with BASH scripts
#!/usr/bin/bash
bioseq -s"163,1272" cp9.plasmid.fas > gene-0001.nuc;
bioseq -t1 gene-0001.nuc > gene-0001.pep;
exit;

Save the above as "extract-gene-v1.bash". Make it executable with chomd +x extract-gene-v1.bash. Run it with ./extract-gene-v1.bash

  1. Improvement 1. make it work for other genes (by using variables)
#!/usr/bin/bash
id=$1;
begin=$2;
end=$3;
bioseq -s"$begin,$end" cp9.plasmid.fas > gene-$id.nuc;
bioseq -t1 gene-$1.nuc > gene-$id.pep;
exit;

Save the above as "extract-gene-v2.bash". Make it executable with chomd +x extract-gene-v2.bash. Run it with ./extract-gene-v2.bash 0001 163 1272 (Note three arguments). Question: How to modify the code to make it work for genes encoded on the reverse strand?

  1. Improvement 2. make it work for both positive and negative genes (by using an "if" statement)
#!/usr/bin/bash
id=$1;
begin=$2;
end=$3;
strand=$4;
bioseq -s"$begin,$end" cp9.plasmid.fas > gene-$id.nuc;
if [ $strand -gt 0 ]; then
    bioseq -t1 gene-$1.nuc > gene-$id.pep;
else
    bioseq -r gene-$1.nuc > gene-$id.rev;
    bioseq -t1 gene-$1.rev > gene-$id.pep;
fi;
exit;
  1. Improvement 3. Make it read "cp9.coord" as an input file, by using a "while" loop:
#!/usr/bin/bash
cat $1 | grep "^[0-9]" | while read line; do
    id=$(echo $line | cut -f1 -d' '); # run commands and save result to a variable
    x1=$(echo $line | cut -f2 -d' ');
    x2=$(echo $line | cut -f3 -d' ');
    strand=$(echo $line | cut -f4 -d' ');
    if [ $strand -lt 0 ]; then
        bioseq -s"$x2,$x1" cp9.plasmid.fas > gene-$id.nuc;
        bioseq -r gene-$id.nuc > gene-$id.rev;
        bioseq -t1 gene-$id.rev;
    else
        bioseq -s"$x1,$x2" cp9.plasmid.fas > gene-$id.nuc;
        bioseq -t1 gene-$id.nuc;
    fi;
done;
exit;
  1. Run Stand-alone BLAST:
  • Add blast binaries to your $PATH in ".bash_profile": export PATH=$PATH:/data/biocs/b/bio425/ncbi-blast-2.2.30+/bin/
  • BLAST tutorial 1. A single unknown sequence against a reference genome
cp ../../bio425/data/GBB.pep ~/. # Copy the reference genome
cp ../../bio425/data/unknown.pep ~/. # Copy the query sequence
makeblastdb -in GBB.pep -dbtype prot -parse_seqids -out ref # make a database of reference genome
blastp -query unknown.pep -db ref # Run simple protein blast
blastp -query unknown.pep -db ref -evalue 1e-5 # filter by E values
blastp -query unknown.pep -db ref -evalue 1e-5 -outfmt 6 # concise output
blastp -query unknown.pep -db ref -evalue 1e-5 -outfmt 6 | cut -f2 > homologs-in-ref.txt # save a list of homologs
blastdbcmd -db ref -entry_batch homologs-in-ref.txt > homologs.pep # extract homolog sequences
  • In-Class challenges
Assignment #3 (Finalized on Feb 15, 2015, 2AM)
BASH Exercises (20 pts)

Note: Log on your eniac account and then ssh into a "cslab" host (e.g., ssh cslab5). Perform the following tasks without changing directory (i.e., stay in your home directory).

  1. UNIX filter exercises (5 pts)
    1. For the codon file /data/biocs/b/bio425/data/codon.table.T, sort by single-letter code of amino acids
    2. use "grep" to show only codons that start with an "A"
    3. Show all codons for "Arg", without amino acid symbols
    4. Use an editor, compose a BASH script (name it "read-codon.bash") that uses a "while" loop to read each line of this file. First, use "grep -v" to exclude stop codons. Then, create three variables to capture the values of three elements on each line. For each line, print the output in the following format: "AAA codes for Lys (K)".
  2. Exercise for the use of wildcard & BASH "for" loop (5 pts)
    1. Long-list (i.e., ls -l) the following file in the "/data/biocs/b/bio425/data/GBB.1con-splitted/" directory: Borrelia_burgdorferi_3615_main.fas (this file contains the main chromosome sequence of the B31 strain of Lyme disease bacteria). Run bioseq -l to find out the length of this sequence.
    2. Without changing directory, long-list ALL files with the ".fas" suffix in the same directory (using wildcard). This command list all replicons (chromosome and 21 plasminds) of this genome.
    3. Write a BASH "for" loop on the command line (do not use an editor) to obtain length of each replicon using bioseq -l
  3. Exercise for BASH script (5 pts): Compose a pipeline of predicting and extracting gene sequences using a single BASH script. (You may name this script "predict-orfs.bash"). The script takes a genome sequence file as a single input. It outputs predicted ORF sequences in two files: "orf.nuc" & "orf.pep". Copy ../../bio425/data/GBB.1con-splitted/Borrelia_burgdorferi_4091_cp26_plasmid_B.fas file to your home directory and predict all ORFs on this plasmid. Note your resulting "orf.pep" file should not contain any stop codons except as the last.
  4. BLAST exercise (5 pts).
    1. Use "blastp" to identify matches of the sequence ../../bio425/data/unknown.pep in the "ref" database (which was created in class), using an e-value cutoff of 1e-10
    2. Show all pairwise alignments
    3. Show output in a tabular format (using "-outfmt 6")
    4. Explain the following blast terms: "Identity", "Positives", and "Expect". [Hint, visit the NCBI BLAST home page and this FAQ].

February 18. No Class (Monday Schedule)

February 25. Genomics (3). Genome BLAST & BioPerl

  • Lecture Slides:
    File:Session-4-small-2015.pdf
  • Learning goals: Homology, BLAST, & Object-oriented programming with Perl
  • BLAST tutorial 2. Find homologs within the new genome itself
cp ../../bio425/data/N40.pep ~/. # Copy the unknown genome
makeblastdb -in N40.pep -dbtype prot -parse_seqids -out N40 # make a database of the new genome
blastp -query unknown.pep -db N40 -evalue 1e-5 -outfmt 6 | cut -f2 > homologs-in-N40.txt # find homologs in the new genome
blastdbcmd -db N40 -entry_batch homologs-in-N40.txt >> homologs.pep # append to homolog sequences
  • BLAST tutorial 3. Multiple alignment & build a phylogeny
../../bio425/bin/muscle -in homologs.pep -out homologs.aln # align sequences
cat homologs.aln | tr ':' '_' > homologs2.aln
../../bio425/bin/FastTree homologs2.aln > homologs.tree # build a gene tree
../../bio425/figtree &  # view tree (works only in the lab; install your own copy if working remotely)
Assignment #4 (Finalized on 2/28/2015, 11am)
BLAST exercise (5 pts)

Run BLASTp to identify all homologs of BBA18 in the reference genome ("ref").

  1. Obtain BBA18 peptide sequence using blastdbcmd -db ref -entry 'BBA18'.
  2. Run blastp against the "ref" database with the following e-value cutoffs: 1e-5, 1e-3, and 1e-1. Submit the results for 1e-3 with the "-outfmt 6" option.
  3. Extract all homologs using blastdbcmd
  4. Combine all sequences with cat and align all sequences using muscle. Show alignment.
  5. Build a tree of homologs using FastTree. Display tree with evolview.
Perl exercise (5 pts)
  1. Compose a Perl script ("dump-coords.pl"), which uses an array (@genes) to hold information for two genes in the ../../bio425/data/mys.coord2 file. Each element of the array would be a reference to a hash. The hash reference itself would hold gene information in the following format: e.g., $gene={'id'=>'0001', 'start'=>16, 'end'=>324, 'frame'=>'+1', 'score'=>0.929}. Print the array by using the Dumper function.
  2. Write a 2nd version of the the script ("read-coords.pl"). This time, instead of hard-coding gene information within the code, the script will read the ../../bio425/data/mys.coord file, save gene features into variables, and dump the same results. The following code helps you to get started:
#!/usr/bin/perl
use strict;
use warnings;
use Data::Dumper; # print complex data structure
# ----------------------------------------
# Author          : WGQ
# Date            : February 30, 2015
# Description     : Read coord file
# Input           : A coord file
# Output          : Coordinates and read frame for each gene
# ----------------------------------------
die "Usage: $0 <coord_file>\n" unless @ARGV == 1; # print usage
my @genes; # declare the array
while(<>) { # read file from argument
  my $line = $_; # save each line to a variable 
  next unless $line =~ /^\d+/; # skip lines except those reporting genes 
  <Your code: split the $line on white spaces and save into variables>
  <Your code: construct anonymous hash and push into @genes>
}
print Dumper(\@genes);
exit;

March 4: Genomics (4). Object-oriented Perl (Continued)

Construct and dump a Bio::Seq object 

#!/usr/bin/perl -w
use strict;
use lib '/data/biocs/b/bio425/bioperl-live'; 
use Bio::Seq;
use Data::Dumper;
my $seq_obj = Bio::Seq->new( -id => "ospC", -seq =>"tgtaataattcaggaaaaga" );
print Dumper($seq_obj);
exit;

Apply Bio::Seq methods: 

my $seq_rev=$seq_obj->revcom()->seq(); # reverse-complement & get sequence string
my $eq_length=$seq_obj->length(); 
my $seq_id=$seq_obj->display_id(); 
my $seq_string=$seq_obj->seq(); # get sequence string
my $seq_translate=$seq_obj->translate()->seq(); # translate & get sequence string
my $subseq1 = $seq_obj->subseq(1,10); # subseq() returns a string
my $subseq2= $seq_obj->trunc(1,10)->seq(); # trunc() returns a truncated Bio::Seq object
  • Challenge 1: Write a BioPerl-based script called "bioperl-exercise.pl". Start by constructing a Bio::Seq object using the "mystery_seq1.fas" sequence. Apply the trunc() method to obtain a coding segment from base #308 to #751. Reverse-complement and then translate the segment. Output the translated protein sequence.
#!/usr/bin/perl -w
use strict;
use lib '/data/biocs/b/bio425/bioperl-live'; 
use Bio::Seq;
my $seq_obj = Bio::Seq->new( -id => "mystery_seq", -seq =>"tgtaataattcaggaaaaga.............." );
print $seq_obj->trunc(308, 751)->revcom()->translate()->seq(), "\n";
exit;
  • Challenge 2. Re-write the above code using Bio::SeqIO to read the "mystery_seq1.fas" sequence and output the protein sequence.
#!/usr/bin/perl -w
use strict;
use lib '/data/biocs/b/bio425/bioperl-live'; 
use Bio::SeqIO;
die "$0 <fasta_file>\n" unless @ARGV == 1;
my $file = shift @ARGV; 
my $input = Bio::Seq->new( -file => $file, -format =>"fasta" );
my $seq_obj = $input->next_seq();
print $seq_obj->trunc(308, 751)->revcom()->translate()->seq(), "\n";
exit;
Assignment #5 (Finalized on March 6th, 2015, 10pm)
BioPerl exercises (10 pts)
  1. Write an "extract.pl" using Perl & BioPerl that extract coding sequences from "coord" files. The script will use Bio::SeqIO to read the genome FASTA file ("mystery_seq1.fas", see Assignment #2 above). It will also read the "mystery_seq1.coord" (see Assignment #2 above) as the 2nd argument. Use Bio::Seq to obtain coding sequences and translate sequences. Your output of protein sequences should not contain stop codons except as the last codon. The following template helps you get started:
#!/usr/bin/perl
use strict;
use warnings;
use lib '/data/biocs/b/bio425/bioperl-live';
use Bio::SeqIO;
# ----------------------------------------
# File            : extract.pl
# Author          : WGQ
# Date            : March 5, 2015
# Description     : Emulate glimmer EXTRACT program
# Input           : A FASTA file with 1 DNA seq and coord file from LONG-ORF
# Output          : A FASTA file with translated protein sequences
# ----------------------------------------
die "Usage: $0 <FASTA_file> <coord_file>\n" unless @ARGV > 0;
my ($fasta_file, $coord_file) = @ARGV;
my $fasta_input = Bio::SeqIO->new(<your code>); # create a file handle to read sequences from a file
my $output = Bio::SeqIO->new(-file=>">$fasta_file".".out", -format=>'fasta'); # create a file handle to output sequences into a file
my $seq_obj = $input->next_seq(); # get sequence object from FASTA file
# Read COORD file & extract sequences
open COORD, "<" . $coord_file;
while (<COORD>) {
      my $line = $_;
      chomp $line;
      next unless $line =~ /^\d+/; # skip lines except
      my ($seq_id, $cor1, $cor2, $strand, $score) = split /\s+/, $line; # split line on white spaces
      if (<your code: if strand is positive>) {
        <your code: use trunc function to get sub-sequence as an object>
      } else {
        <your code: use the trunc() function to get sub-sequence as an object>
        <your code: use the revcom() function to reverse-complement the seq object>
      }
      <your code: use translate() function to obtain protein sequence as an abject, "$pro_obj">
      $output->write_seq($pro_obj);
}
close COORD;
exit;

March 11: Review

  1. Browse & Filter "Big Data" files with UNIX filters
    1. Genome file
      1. List all FASTA files in the "../../bio425/data" directory: ls ../../bio425/data/*.fas
      2. Count number of sequences in a FASTA file: "../../bio425/data/GBB.pep": grep -c ">" ../../bio425/data/GBB.pep
      3. Count number of sequences in all FASTA file in this directory: grep -c ">" ../../bio425/data/*.fas
      4. Remove directory names from the above output: grep ">" ../../bio425/data/*.fas | sed 's/^.\+data\///' or grep ">" ../../bio425/data/*.fas| cut -f5 -d'/'
    2. GenBank file
      1. Show top 10 lines in "../../bio425/data/mdm2.gb": head ../../bio425/data/mdm2.gb
      2. Show bottom 10 lines: tail ../../bio425/data/mdm2.gb
      3. Extract all lines containing nucleotides: cat ../../bio425/data/mdm2.gb | grep -P "^\s+\d+[atcg\s]+$"
    3. Transcriptome file: a microarray data set
      1. Count the number of lines in "../../bio425/data/ge.dat": wc -l ../../bio425/data/ge.dat
      2. Count the number of genes: cut -f1 ../../bio425/data/ge.dat | grep -vc "Desc"
      3. Count the number of cells: head -1 ../../bio425/data/ge.dat | tr '\t' '\n' | grep -vc "Desc"
    4. Transcriptome file: an RNA-SEQ output file
      1. Count the nubmer of lines in "../../bio425/data/gene_exp.diff": wc -l ../../bio425/data/gene_exp.diff
      2. Show head: head ../../bio425/data/gene_exp.diff
      3. Show tail: tail ../../bio425/data/gene_exp.diff
      4. Count nubmer of "OK" gene pairs (valid comparisons): grep -c "OK" ../../bio425/data/gene_exp.diff
      5. Count nubmer of significantly different genes: grep -c "yes$" ../../bio425/data/gene_exp.diff
      6. Sort by "log2(fold_change)": grep "yes$" ../../bio425/data/gene_exp.diff | cut -f1,10 | sort -k2 -n
    5. A proteomics dataset: SILAC
      1. Count the number of line in "../../bio425/data/Jill-silac-batch-1.dat": wc -l ../../bio425/data/Jill-silac-batch-1.dat
      2. Show top: head ../../bio425/data/Jill-silac-batch-1.dat
      3. Show bottom: wc -l ../../bio425/data/Jill-silac-batch-1.dat
      4. Show results for P53 genes: grep -w "TP53" ../../bio425/data/Jill-silac-batch-1.dat
      5. Sort by "log_a_b_ratio": sort -k5 -n ../../bio425/data/Jill-silac-batch-1.dat
      6. Show ranking of P53: sort -k5 -n -r ../../bio425/data/Jill-silac-batch-1.dat | cat -n | grep -w "TP53"
  2. Identify homologs and build a phylogeny
    1. Copy genome file: "../../bio425/data/GBB.1con-splitted/Borrelia_burgdorferi_4075_lp54_plasmid_A.fas" to your home directory as "lp54.fas": cp ../../bio425/data/GBB.1con-splitted/Borrelia_burgdorferi_4075_lp54_plasmid_A.fas lp54.fas
    2. Identify ORFs in file using "long-orfs": long-orfs lp54.fas lp54.coord
    3. Extract nucleotide sequences: extract lp54.fas lp54.coord > lp54.nuc
    4. Use "bioseq" to translate into peptides, into "lp54.pep": bioseq -t1 lp54.nuc > lp54.pep
    5. Make a blast database: makeblastdb -in lp54.pep -dbtype 'prot' -parse_seqids -out lp54
    6. Copy file "../../bio425/data/BBA68.pep" to your home directory: cp ../../bio425/data/BBA68.pep .
    7. Find homologs of "BBA68.pep" in "lp54.pep" using "blastp": blastp -query BBA68.pep -db lp54 -evalue 1e-5 -outfmt 6 | cut -f2 > BBA68.homologs
    8. Extract all blast homologs using "blastdbcmd": blastdbcmd -db lp54 -entry_batch BBA68.homologs > BBA68.homologs.pep
    9. Align all homologs using "muscle": muscle -in BBA68.homologs.pep -out BBA68.homologs.aligned
    10. Build a tree of BBA65 homologs using "FastTree": FastTree BBA68.homologs.aligned > BBA68.dnd
    11. Show tree with evolview
  3. Review BASH "while" & "for" loops (see Assignment #3)
  4. Review the use Bio::SeqIO to read FASTA files and the use Bio::Seq methods to manipulate sequences (see Assignment #5)

March 18. Midterm Practicum

  1. Hours: 10:10-12:30pm
  2. Rules: Computer access to course wiki & terminal only.
  3. Copy and paste commands and outputs to a text file

March 25 (No Class; Do Assignment #6)

Assignment #6 (Finalized on Tuesday 3/24/2015, 11pm)
Perl/BioPerl Exercises (10 pts)
  • The following Perl code dumps nucleotide and codon frequencies given a coding sequence. It is based on the Bio::Tools::SeqStats module of BioPerl. Copy and run it with ./seq-stats.pl ../../bio425/data/B31_ospA.fas to understand its behavior.
#!/usr/bin/perl -w
use strict;
use lib '/data/biocs/b/bio425/bioperl-live';
use Bio::Tools::SeqStats;
use Bio::SeqIO;
use Data::Dumper;
die "Usage: $0 <fasta>\n" unless @ARGV == 1;
my $filename = shift @ARGV;
my $in = Bio::SeqIO->new(-file=>$filename, -format=>'fasta');
my $seqobj = $in->next_seq();
my $seq_stats = Bio::Tools::SeqStats->new($seqobj);
my $monomers = $seq_stats->count_monomers();
my $codons = $seq_stats->count_codons();
print Dumper($monomers, $codons);
exit;
  • Write a Perl code ("my-seq-stats.pl") to emulate its two methods ("count_monomers" & "count_codons") with the following specific requirements:
    • Read the fasta file with Bio::SeqIO
    • Write a subroutine named as "count_monomers" to count and print the frequency of each nucleotide (in percentage), sorted by nucleotide type. The argument for the subroutine would be the sequence as a string, as in count_monomers($seqobj->seq). The return value would be a reference to a hash (the same as the $monomers in the above code).
    • Hint: use hash to count unique bases, see Perl Cookbook example, especially the code listed under "4.6.2.4. Faster but different"
  • In a similar way, write a subroutine named as "count_codons" to count and print the frequency of each codon, sorted by codons. Your codon counts should be the same as those produced by the listed code.

April 1: Transcriptome (1): Univariate statistics

  1. Set a working directory
    1. Using a Linux terminal, make a directory called R-work, "cd" into this directory.
    2. Start R studio: Type "rstudio &" on terminal prompt and hit return (Note: This link works only if you use computers in the 1000G lab. Install and use your own R & R Studio for homework assignments)
    3. Find working directory with getwd()
  2. The basic R data structure: Vector
    1. Construct a character vector with c.vect=c("red", "blue", "green", "orange", "yellow", "cyan")
    2. Construct a numerical vector with n.vect=c(2, 3, 6, 10, 1, 0, 1, 1, 10, 30)
    3. Construct vectors using functions
      1. n.seq1=1:20
      2. n.seq2=seq(from=1, to=20, by=2)
      3. n.rep1=rep(1:4, times=2)
      4. n.rep2=rep(1:4, times=2, each=2)
    4. Use built-in help of R functions: ?seq or help(seq)
    5. Find out data class using the class function: class(c.vect)
  3. Access vector elements
    1. A single value: n.vect[2]
    2. A subset: n.vect[3:6]
    3. An arbitrary subset: n.vect[c(3,7)]
    4. Exclusion: n.vect[-8]
    5. Conditional: n.vect[n.vect>5]
  4. Apply functions
    1. Length: length(n.vect)
    2. Range: range(n.vect); min(n.vect); max(n.vect)
    3. Descriptive statistics: sum(n.vect); var(n.vect); sd(n.vect)
    4. Sort: order(n.vect). How would you get an ordered vector of n.vect? [Hint: use ?order to find the return values]
    5. Arithmetic: n.vect +10; n.vect *10; n.vect / 10
  5. Quit an R session
    1. Click on the "History" tab to review all your commands
    2. Save your commands into a file by opening a new "R Script" and save it as vector.R
    3. Save all your data to a default file .RData and all your commands to a default file ".Rhistory" with save.image()
    4. Quit R-Studio with q()
  • R tutorial 2. Data distribution using histogram
  1. Start a new R studio session and set working directory to ~/R-work
  2. Generate a vector of 100 normal deviates using x.ran=rnorm(100)
  3. Visualize the data distribution using hist(x.ran)
  4. Explore help file using ?help; example(hist)
  5. How to break into smaller bins? How to add color? How to change x- and y-axis labels? Change the main title?
  6. Test if the data points are normally distributed.[Hints: use qqnorm() and qqline()]
  7. Save a copy of your plot using "Export"->"Save Plot as PDF"
  • R tutorial 3. Matrix & Data Frames
  1. Using a Linux terminal, make a copy of breast-cancer transcriptome file /data/biocs/b/bio425/data/ge.dat in your R working directory
  2. Start a new R studio session and set working directory to ~/R-work
  3. Read the transcriptome file using ge=read.table("ge.dat", header=T, row.names=1, sep="\t")
    1. What is the data class of ge?
    2. Access data frame. What do the following commands return? ge[1,]; ge[1:5,]; ge[,1]; ge[,1:5]; ge[1:5, 1:5]
    3. Apply functions: head(ge); tail(ge); dim(ge)
  4. Save a copy of an object: ge.df=ge.
  5. Transform the transcriptome into a numerical matrix for subsequent operations: ge=as.matrix(ge)
  6. Test if the expression values are normally distributed.
  7. Save and quit the R session
  • In class challenge: Replicate normalization in Figure 4.8 (pg 208)
Assignment #7 (Finalized on Friday, April 3, 2015, 3pm)
  • (5 pts) Test the "GT-AG" rule of introns. Complete the following script to extract all intron sequences from this file ../../bio425/data/mdm2.gb.
    • After carefully studying and deciphering the script, replace "?"s (a total of 6) in the script with real numbers
    • Save the script as "splice.pl" & run with the four options individually, as in splice -i mdm2.gb.
    • Make a SeqLogo to show that all introns start with "GT" and ends with "AG". To do so, copy & paste individual sequences at the donor sites into this text box and click "Create Logo". Print and hand in the resulting image file. Indicate which sites are conserved.
    • Repeat for the acceptor-site sequences. Indicate which sites are conserved.
#!/usr/bin/perl -w

use strict;
use lib '/data/biocs/b/bio425/bioperl-live';
use Bio::SeqIO;
use Data::Dumper;
use Getopt::Std;
# ----------------------------------------
# Author          : WGQ
# Date            : April 2, 2015
# Description     : Extract intron, exon, and junction sequences
# Input           : A GenBank file containing introns
# Output          : A Fasta file to feed into WebLogo
# Gene Model      : ---exon[i]-donor[i]-intron[i]-acceptor[i]-exon[i+1]-donor[i+1]-intron[i+1]-acceptor[i+1]---
# ----------------------------------------
# Part 1. Read 4 options & genbank file
my %opts;
getopts("eida", \%opts); # process options
die "Usage: $0 [-e(xon) -i(ntron) --d(onor) --a(cceptor)] <a GenBank file>\n" unless @ARGV == 1 && ($opts{e} || $opts{i} || $opts{d} || $opts{a}); # print usage if no input file or no options given
my $gb = shift @ARGV;
my $in = Bio::SeqIO->new(-file=>$gb, -format=>'genbank');
my $seq = $in->next_seq();
my (@exons, @introns, @donors, @acceptors); # declare arrays as data contains

# Part 2. Extract exon information
foreach my $feat ( $seq->get_SeqFeatures() ) { # loop through each genbank feature
    next unless $feat->primary_tag() eq "mRNA"; # skip unless the feature is tagged as "mRNA"
    my $location_obj = $feat->location(); # splice coordinates saved as a Bio::Location::Split object
    my $exon_id = 1;
    foreach my $loc ($location_obj->each_Location) { # access each exon coords object
        push @exons, {
            'order' => $exon_id++,
            'start' => $loc->start,
            'end' => $loc->end
        };
    }
}

# print Dumper(\@exons); exit; # uncomment to see results of parsed exons

# Part 3. Calcuate intron, donor, acceptor objects
## Extract introns coords:
for (my $i=0; $i<$#exons; $i++) { # for each exon
    push @introns, {
        'order' => $exons[$i]->{order},
        'start' => $exons[$i]->{end}+1, # intron i starts at (exon i)'s end + 1
        'end' => $exons[$i+1]->{start}-1, # intron i ends at (exon i+1)'s start -1
    };
}

# print Dumper(\@introns); exit; # uncomment to see introns

## Donor sites (-10 to -1 of an exon and 1-20 of intron)
for (my $i=0; $i<$#exons; $i++) {
    push @donors, {
        'order' => $exons[$i]->{order},
        'start' => $exons[$i]->{end} - ?, # donor i starts at (exon i)'s -10 to -1
        'end' => $introns[$i]->{start} + ?, # donor i ends at (intron i+1)'s 1 to 20
    };
}

# print Dumper(\@donors); exit; # uncomment to see donor sequences

## Acceptor sites (-20 to -1 of an intron and 1-10 of exon)
for (my $i=0; $i<$#exons; $i++) {
    push @acceptors, {
        'order' => $exons[$i]->{order},
        'start' => $introns[$i]->{end} - ?, # acceptor i starts at (intron i)'s -20 to -1
        'end' => $exons[$i+1]->{start} + ?, # acceptor i ends at (exon i+1)'s 1 to 10
    };
}

# print Dumper(\@acceptors); exit; # uncomment to see acceptor sequences

# Part 4. Output sequences
&print_seq("intron", \@introns) if $opts{i};
&print_seq("exon", \@exons) if $opts{e};
&print_seq("donor", \@donors) if $opts{d};
&print_seq("acceptor", \@acceptors) if $opts{a};

exit;

sub print_seq {
    my ($tag, $ref) = @_;
    my @bins = @$ref;
    foreach my $bin (@bins) {
        my $out = Bio::SeqIO->new(-format=>'fasta');
        my $seq =$seq->trunc(?, ?);
        $seq->id($tag . "_" . $bin->{order});
        $out->write_seq($seq);
    }
}
  • (2 pts) Install R (choose a binary distribution) first and then R Studio to your home/laptop computer [No need to show any output. I trust you on this.]
  • (4 pts) Make 2 histograms based on the "ge" data set: (a) expression values for a single (any one if fine) selected cell line (cell lines are in columns, using small-sized bins, e.g., "br=100") and (b) expression values for a selected (any one if fine) gene (genes are in rows). Show all R commands and the final plots (label the plot title with cell line or gene name) [Notes: You need to download a copy of the ge.dat onto your own computer. On Mac, you could run this command: scp your_user_name@eniac.cs.hunter.cuny.edu:ge.dat ge.dat. On Windows, download and install sftp or WinSCP for file transfer from/to your eniac account.]
  • (4 pts) Use the help() and example() functions to learn how to use the which() and grep() functions. Show how to use these two functions, respectively, to display gene expression values for a gene called "ESR1" in the "ge" data set. [Hint: use the rownames() function to obtain gene names of the "ge" data set.]

April 8: No class (Spring Recess)

April 15: Transcriptome (2): Bi- and Multi-variate statistics

  • Learning goal: (1) multivariate clustering analysis; (2) Classification of breast-cancer subtypes
  • Lecture slides:
    File:Session-8-small.pdf
  • Tutorial 1. Gene filtering
  1. Open a new R Studio session and set working directory to R-work
  2. Load the default workspace and plot a histogram of the gene expression using hist(ge, br=100). Answer the following questions:
    1. Make sure ge is a matrix class. If not, review the last session on how to make one
    2. What is the range of gene expression values? Minimum? Maximum? 
      range(ge); min(ge); max(ge)
    3. Are these values normally distributed? Test using qqnorm and qqline.
    4. If not, which data range is over-represented? Why? 
      Low gene expression values are over-represented, because most genes are NOT expressed in a particular cell type/tissue.
  3. Discussion Questions:
    1. What does each number represent? 
      log2(cDNA)
    2. Why is there an over-representation of genes with low expression values? 
      Because most genes are not expressed in these cancer cells
    3. How to filter out these genes? 
      Remove genes that are expressed in low amount in these cells, by using the function pOverA (see below)
    4. How to test if the filtering is successful or not? 
      Run qqnorm() and qqline()
  4. Remove genes that do not vary significantly among breast-cancer cells
    1. Download the genefilter library from BioConductor using the following code 
      source("http://bioconductor.org/biocLite.R"); biocLite("genefilter")
    2. Load the genefilter library with library(genefilter)
    3. Create a gene-filter function: f1=pOverA(p=0.5, A=log2(100)). What is the pOverA function? 
      Remove genes expressed with lower than log2(100) amount in half of the cells
    4. Obtain indices of genes significantly vary among the cells: index.retained=genefilter(ge, f1)
    5. Get filtered expression matrix: ge.filtered=ge[index.retained, ]. How many genes are left? 
      dim(ge.filtered)
  5. Test the normality of the filtered data set
    1. Plot with hist(); qqnorm(); and qqline(). Are the filtered data normally distributed?
    2. Plot with boxplot(ge.filtered). Are expression levels distributed similarly among the cells?
  • Tutorial 2. Select genes vary the most in gene expression
  1. Explore the function mad. What are the input and output? 
    Input: a numerical array. Output: median deviation
  2. Calculate mad for each gene: mad.ge=apply(ge.filtered, MARGIN=1, FUN=mad)
  3. Obtain indices of the top 100 most variable genes: mad.top=order(mad.ge, decreasing=T)[1:100]
  4. Obtain a matrix of most variable genes: ge.var=ge.filter[mad.top,]
  • Part 3. Classify cancer subtypes based on gene expression levels
  1. Discussion Questions:
    1. How would you measure the difference between a one-dimensional variable? 
      d=|x1-x2|
    2. How would you measure the difference between a two-dimensional variable? 
      d=|x1-x2|+|y1-y2|
    3. How would you measure the Euclidean difference between a three-dimensional variable? 
      d=|x1-x2|+|y1-y2|+|z1-z2|
    4. How would you measure the Euclidean difference between a multi-dimensional variable? 
      d=SQRT(sum([xi-xj]^2))
    5. To measure similarities between cells based on their gene expression values, is it better to use Euclidean or correlation distances? 
      Correlational distance measures similarity in trends regardless of magnitude.
  2. Calculate correlation matrix between cells: cor.cell=cor(ge.var)
  3. Calculate correlation matrix between genes: cor.gene=cor(t(ge.var)) What does the t() function do? 
    transposition (turn rows into columns and columns into rows)
  4. Obtain correlational distances between cells: dg.cell=as.dendrogram(hclust(as.dist(1-cor.cell)))
  5. Obtain correlational distances between genes: dg.gene=as.dendrogram(hclust(as.dist(1-cor.gene)))
  6. Plot a heat map: heatmap(ge.var, Colv=dg.cell, Rowv=dg.gene)
Assignment #8 (Finalized on Sunday 4/19/2015 at 11:30pm)

(10 pts) The following table lists expression levels of a gene measured under an Experimental and a Control conditions, each of which was replicated five times:

Experimental Control
Replicate 1 606 287
Replicate 2 441 198
Replicate 3 702 366
Replicate 4 597 255
Replicate 5 888 402

Test significance of gene expressions between the Exp and Ref groups. Show all R commands, test results, & plots.

  • Plot a boxplot
  • Plot a vertical stripcharts. Why is a stripchart more informative than a boxplot?
  • Perform a paired t-test, using the log2 scale. Are gene expression values significantly different between the Exp and Ref groups?
  • Plot a scatter plot and add a regression line. Show results of regression analysis, include the R-squared value and the p value. Are the expression levels between the two conditions significantly correlated?

April 22: Transcriptome (3). RNA-SEQ Analysis

gene.fpkm=read.table("../../bio425/data/genes.fpkm_tracking", head=T, sep="\t")
dim(gene.fpkm)
head(gene.fpkm)
fpkm=gene.fpkm[which(gene.fpkm$C1_status=='OK' & gene.fpkm$C2_status=='OK'),] # filter low-quality values
hist(log10(fpkm$C1_FPKM), br=100)
plot(density(log10(fpkm$C1_FPKM)))
plot(log10(fpkm$C1_FPKM), log10(fpkm$C2_FPKM))
fpkm.m=log2(fpkm$C1_FPKM) + log2(fpkm$C2_FPKM)
fpkm.a=log2(fpkm$C1_FPKM) - log2(fpkm$C2_FPKM)
plot(fpkm.m, fpkm.a)
  • Tutorial 2. Test differential gene expressions
gene=read.table("/data/biocs/b/bio425/data/gene_exp.diff", header=T, sep="\t")
dim(gene)
head(gene)
gene.ok=gene[which(gene$status=='OK'),] # filter
gene.sig=gene.ok[which(gene.ok$significant=="yes"),] # select significant genes
plot(gene.ok$log2.fold_change., -log10(gene.ok$q_value)) # volcano plot
plot(gene.ok$log2.fold_change., -log10(gene.ok$q_value), col=gene.ok$significant)
Assignment #9 (Finalized on Friday 4/24/2015 at 2pm)
  • (5 pts). Filter genes in the "ge.mat" using the "mad" function. Retain the top 50 most-variable genes. Calculate pairwise gene and cell correlation distances. Plot a heatmap. Answer the following questions:
    • What does the "mad" function return? What is the biological rationale to use this function to filter genes, before identifying subtypes among cell lines?
    • How many major subtypes of cancer cells and subgroups of genes you could identify, respectively?
    • Label the genes as two largest groups (Group 1 & 2 Genes). Similarly, label the largest two groups of cell lines as "Group 1" and "Group 2" cells. Explain the expression profiles of Group 1 and Group 2 genes in each subgroup of cells. (e.g., "Group 1 genes are up-regulated in Group 1 Cells and down-regulated in Group 2 Cells". Note that the "yellow" is high in heat color and "red" low).
  • (5 pts). Transfer the two RNA-SEQ output files ("genes.fpkm_tracking" and "gene_exp.diff", both in the folder "bio425/data/") to your local computer (using "scp"). Make a histogram of the "C2" sample (use the first file), an MA plot to show differences between "C1" and "C2" in FPKM counts (use the first file), and a volcano plot (use the 2nd file). Show all your R commands. How many genes are significantly different between the two conditions (based on the 2nd file)?

April 29: Population Analysis (1)

  • Learning goals: (1) SNP analysis (single-locus), (2) haplotype analysis (multiple loci)
  • Lecture slides:
    File:Session-10.pdf

Tutorial 1. Extract SNP sites 

#!/usr/bin/perl
# Author: WGQ
# Description: Examine each alignment site as a SNP or constant
# Input:  a DNA alignment
# Output: a haplotypes alignemnt
use strict;
use warnings;
use Data::Dumper;

# Part I. Read file and store NTs in a hash (use Bio::AlignIO to read an alignment is better)
my %seqs; # declare a hash as sequence container
my $length;
while (<>) { # read file line by line
  my $line = $_;
  chomp $line;
  next unless $line =~ /^seq/; # skip lines unless it starts with "seq"
  my ($id, $seq) = split /\s+/, $line; # split on white spaces
  $seqs{$id} = [ (split //, $seq) ]; # id as key, an array of nts as value
  $length = length($seq);
}

my %is_snp; # declare a hash to store status of alignment columns
# Part II. Go through each site and report status
for (my $pos = 0; $pos < $length; $pos++) {
  my %seen_nt; # declare a hash to get counts of each nt at a aligned position
  foreach my $id (keys %seqs) { # collect and count all nts at an aligned site
    my $nt =  $seqs{$id}->[$pos];
    $seen_nt{$nt}++;
  }
  my @key_nts = keys %seen_nt;
  if (@key_nts > 1) { # a SNP site has more than two nucelotdies
    $is_snp{$pos} = 1;
  } else { # a constant site
    $is_snp{$pos} = 0;
  }

# Part III. Print haplotypes (i.e., nucleotides at SNP sites for each chromosome)
foreach my $id (keys %seqs) { # for each chromosome
  print $id, "\t";
  for (my $pos = 0; $pos < $length; $pos++) { # for each site
    next unless ?; # skip constant site
    print ?; # print nt at a SNP site
  }
  print "\n";
}

exit;

Tutorial 2. Hardy-Weinberg Equilibrium: Calculate expected genotype frequencies

Assignment #10 (Finalized on Friday 5/1/2015, 1am)
  • Based on the ../../bio425/data/ex3-1.aln,
  • (5 pts). Analyze alignment by eye: Define "allele", "SNP", and "haplotype". Print out the alignment
    • Label all SNP sites
    • Count frequency of each of the two alleles at the first SNP site
    • List all haplotypes, and count frequency of each haplotype.
    • How many SNP (i.e., variable) sites you expect to see in a window of DNA containing 10K bases among humans?
    • How many nucleotide states (2, 3, or 4) you expect to see for an individual SNP site?
    • Do you expect to see more or less transitons than tranvsersions?
    • More synonymous or nonsynonymous SNPs (if the sequence codes for a protein)?
  • (5 pts). Complete the above PERL script by replacing the two question marks. Compare your output to the haplotypes you obtained manually. They should be the same.

May 6: Population Analysis (2)

  • Learning goals: Case-Control studies for gene mapping
  • Lecture slides:
    File:Session-11-small.pdf
  • Tutorial 1. Genome-wide association studies (GWAS)
  • Tutorial 2. Database access with DBI

May 13: Final Review

May 20: Final Exam

General Information

Course Description

  • Background: Biomedical research is becoming a high-throughput science. As a result, information technology plays an increasingly important role in biomedical discovery. Bioinformatics is a new interdisciplinary field formed between molecular biology and computer science.
  • Contents: This course will introduce both bioinformatics theories and practices. Topics include: database searching, sequence alignment, molecular phylogenetics, structure prediction, and microarray analysis. The course is held in a UNIX-based instructional lab specifically configured for bioinformatics applications.
  • Problem-based Learning (PBL): For each session, students will work in groups to solve a set of bioinformatics problems. Instructor will serve as the facilitator rather than a lecturer. Evaluation of student performance include both active participation in the classroom work as well as quality of assignments (see #Grading Policy).
  • Learning Goals: After competing the course, students should be able to perform most common bioinformatics analysis in a biomedical research setting. Specifically, students will be able to
    • Approach biological questions evolutionarily ("Tree-thinking")
    • Evaluate and interpret computational results statistically ("Statistical-thinking")
    • Formulate informatics questions quantitatively and precisely ("Abstraction")
    • Design efficient procedures to solve problems ("Algorithm-thinking")
    • Manipulate high-volume textual data using UNIX tools, Perl/BioPerl, R, and Relational Database ("Data Visualization")
  • Pre-requisites: This 3-credit course is designed for upper-level undergraduates and graduate students. Prior experiences in the UNIX Operating System and at least one programming language are required. Hunter pre-requisites are CSCI132 (Practical Unix and Perl Programming) and BIOL300 (Biochemistry) or BIOL302 (Molecular Genetics), or permission by the instructor. Warning: This is a programming-based bioinformatics course. Working knowledge of UNIX and Perl is required for successful completion of the course.
  • Textbook: Gibson & Muse (2009). A Primer of Genome Science (Third Edition). Sinauer Associates, Inc.
  • Academic Honesty: Hunter College regards acts of academic dishonesty (e.g., plagiarism, cheating on examinations, obtaining unfair advantage, and falsification of records and official documents) as serious offenses against the values of intellectual honesty. The College is committed to enforcing the CUNY Policy on Academic Integrity and will pursue cases of academic dishonesty according to the Hunter College Academic Integrity Procedures.

Grading Policy

  • Treat assignments as take-home exams. Student performance will be evaluated by weekly assignments and projects. While these are take-home projects and students are allowed to work in groups and answers to some of the questions are provided in the back of the textbook, students are expected to compose the final short answers, computer commands, and code independently. There are virtually an unlimited number of ways to solve a computational problem, as are ways and personal styles to implement an algorithm. Writings and blocks of codes that are virtually exact copies between individual students will be investigated as possible cases of plagiarism (e.g., copies from the Internet, text book, or each other). In such a case, the instructor will hold closed-door exams for involved individuals. Zero credits will be given to ALL involved individuals if the instructor considers there is enough evidence for plagiarism. To avoid being investigated for plagiarism, Do NOT copy from others or let others copy your work.
  • Submit assignments in Printed Hard Copies. Email attachments will NOT be accepted. Each assignment will be graded based on timeliness (10%), whether executable or having major errors (50%), algorithm efficiency (10%), and readability in programming styles (30%, see #Assignment Expectations).
  • The grading scheme
    • Assignments (100 pts): 10 exercises.
    • Mid-term (50 pts).
    • Final Project (50 pts)
    • Classroom performance (50 pts): Active engagement in classroom exercises and discussions
    • Attendance (50 pts): 1 unexcused absences = 40; 2 absences = 30; More than 2 = 0.

Assignment Expectations

  • Use a programming editor (e.g., vi, emacs, sublime) so you could have features like automatic syntax highlighting, indentation, and matching of quotes and parenthesis.
  • All PERL code must begin with "use strict; and use warnings;" statements. For each assignment, unless otherwise stated, I would like the full text of the source code. Since you cannot print using the text editor in the lab (even if you are connected from home), you must copy and paste the code into a word processor or a local text editor. If you are using a word processor, change the font to a fixed-width/monospace font. On Windows, this is usually Courier.
  • Also, unless otherwise stated, both the input and the output of the program must be submitted as well. This should also be in fixed-width font, and you should label it in such a way so that I know it is the program's input/output. This is so that I know that you've run the program, what data you have used, and what the program produced. If you are working from the lab, one option is to email the code to yourself, change the font, and then print it somewhere else as there is no printer in the lab.
  • Recommended Style
  • Bad Style

Useful Links

Unix Tutorials

Perl Help

  • Professor Stewart Weiss has taught CSCI132, a UNIX and Perl class. His slides go into much greater detail and are an invaluable resource. They can be found on his course page here.
  • Perl documentation at perldoc.perl.org. Besides that, running the perldoc command before either a function (with the -f option ie, perldoc -f substr) or a perl module (ie, perldoc Bio::Seq) can get you similar results without having to leave the terminal.

Regular Expression

Bioperl

SQL

R Project

  • Install location and instructions for Windows
  • Install location and instructions for Mac OS X
  • Install R-Studio
  • For users of Ubuntu/Debian:
sudo apt-get install r-base-core

© Weigang Qiu, Hunter College, Last Update ~~

Retrieved from "https://wiki.genometracker.org/index.php?title=Biol425_2015&oldid=3119"